Logosol C210

The Logosol C210 400V – 3 phase TWIN BLADE BOARD EDGER is a unique and efficient machine that can be used to edge boards of all sizes. Unlike traditional board edgers, which have a single blade, the C210 has two blades that are set at a slight angle. This allows the machine to cut boards with minimal waste and a smooth finish. The C210 is also equipped with a number of features that make it easy to use and safe, such as a feed roller, a sawdust extractor, and a blade guard.

Key Features

• Twin blades for precise edging: The C210 has two blades that are set at a slight angle, which allows it to cut boards with minimal waste and a smooth finish.
• Efficient and productive: The C210 can edge boards up to 12 inches wide and 8 inches thick, making it a very efficient and productive machine.
• Easy to use: The C210 is equipped with a feed roller, a sawdust extractor, and a blade guard, which make it easy to use and safe.
• Compact and portable: The C210 is relatively compact and lightweight, making it easy to transport and store.
• Versatile: The C210 can be used to edge boards of all sizes and species.

Production and Efficiency

The Logosol C210 is a very efficient and productive machine. It can edge boards up to 12 inches wide and 8 inches thick at a rate of up to 10 feet per minute. This makes it a good choice for businesses that need to edge a lot of boards. The C210 is also very precise, and it can produce boards with a smooth finish.

The Logosol C210 board edger can be used to edge a variety of softwoods and hardwoods. The type of wood that can be cut or edged will depend on the thickness of the wood and the feed rate. For example, the machine can edge pine boards up to 30 mm thick at a feed rate of 4 m/min. However, the machine will need to be operated at a slower feed rate to edge harder woods, such as oak and maple.

Choosing the Board Edger

When choosing a board edger, there are a few factors to consider:

• The size of the boards you need to edge: Make sure the board edger you choose can edge boards that are the size you need.
• The type of wood you will be edging: Some woods are harder to edge than others, so you need to make sure the board edger you choose can handle the type of wood you will be edging.
• The production capacity you need: If you need to edge a lot of boards, you will need a board edger that has a high production capacity.
• The features you need: Some board edgers have additional features, such as a feed roller, a sawdust extractor, or a blade guard. Choose the board edger that has the features you need.
• The budget: Board edgers can range in price from a few thousand dollars to several thousand dollars. Choose the board edger that fits your budget.

Benefits and Drawbacks

The benefits of the Logosol C210 include:

• Twin blades for precise edging.
• Efficient and productive.
• Easy to use.
• Compact and portable.
• Versatile.

The drawbacks of the Logosol C210 include:

• It can be a bit expensive.
• It is not as powerful as some other board edgers.

Maintenance and Care

The Logosol C210 requires regular maintenance to keep it in good working condition. This includes:

1. Clean After Each Use: Remove sawdust and debris from the machine after every operation to maintain efficiency and reduce fire hazards.

2. Lubricate Moving Parts: Regularly lubricate bearings, chains, and the conveyor system to minimize friction, wear, and heat.

3. Replace Worn Parts: Inspect for wear and tear, replacing damaged or worn-out components promptly to ensure peak performance.

4. Sharpen Blades: Maintain sharp blades for clean and precise cuts, reducing energy consumption.

Conclusion

The Logosol C210 is a high-quality board edger that is perfect for businesses and hobbyists alike. It is easy to use, safe, and efficient. The twin blades produce precise and smooth edges, and the machine can handle a variety of board sizes. The C210 is also relatively compact and portable, making it easy to transport and store.